| |
 |
Acrylics |
ACRYLICS
Toughened Acrylics are two part adhesives and
curing occurs when the adhesive and the initiator
are combined, however it is not always necessary
to premix them, for some grades it is a matter
of applying the adhesive to one surface and the
initiator to the second side. The advantage of
using toughened acrylics is that they offer very
high strength bonds, with stand harsh environmental
conditions, bond to a variety of substrates, and
reduce surface preparation requirements.
|
Product
|
Gap
Fill
(mm)
|
Handling
Time
|
Full
Cure
|
Mode
of Use
|
|
F246
|
0.75
|
2-5 mins(No 1 init)
30-60 secs(No 5 init)
|
24 hours
24 hours
|
Apply the adhesive as
aBead, do not spread
|
|
F5002
|
0.75
|
30-60 secs(No 5 init)
|
24 hours
|
May be used bead on beador
premixed
|
**For greater detail of technical
information go to the following link………
http://www.bondmaster.com/search.asp
|
