|
 |
 |
 |
| |
EZ-SPRAY JR SYSTEM
The EZ-Spray System is a versatile, convenient and
easy to use spray system for spraying urethane rubber,
urethane plastic, styro coating and silicone rubber.
Using the cartridge system, it makes for a low cost,
portable system with minimum cleaning and maintenance.
EZ~Spray 45 Urethane
Rubber
For making sprayed
rubber molds used to cast concrete, plaster, wax,
etc. Surface preparation (applying sealing agent
+ release agent) required.
EZ~Spray Silicone
Rubber
For making fast sprayed
rubber molds that have the best release properties
for production casting of resins, plaster, etc.
Minimal surface preparation required.
EZ~Spray Urethane
Plastic
For spraying over
cured rubber molds to make fast support shells /
mother molds. Plastic can also be sprayed into rubber
molds to make fast, lightweight castings.
StyroCoat Styrofoam
Coating
Coat large areas of
styrofoam quickly with a plastic that is flame and
impact resistant. Can then be sanded, primed and
painted. Great for creating themed environments,
theatre and movie special effects.
EZ~Spray Rigid Foam
Make lightweight,
flame resistant castings, create special effects
or use for lightweight reinforcement.
|
Product
|
Pot
Life
|
Full
Cure
|
Shore
Hardness
|
|
EZ-Spray 45 Rubber
|
20 minutes
|
16 hours
|
45A
|
|
EZ-Spray 35 Silicone
|
1.5 minutes
|
1 hour
|
35A
|
|
EZ-Spray Plastic
|
2 seconds
|
3 hours
|
75D
|
|
EZ-Spray StyroCoat
|
2 seconds
|
1 hour
|
80D
|
|
EZ-Spray Foam
|
13 seconds
|
2 minutes
|
N/A
|
|
|
|
|
|
 |
|
Site
by
|
 |
Media
235 |
|
Rowe
Trading Company
4 Holder Avenue, Richmond, South Australia, 5033
Telephone: +61 8 8234 0000
Fax: +61 8 8234 2092
E-mail: sales@rowetrading.com.au
|
|
|
|
