XTC-3D 1 Gallon Kit | Rowe Trading UA-67474532-1

Adhesives

We are specialists in all types of Adhesives
including: Water Based,Solvent based,
Hot Melt and specialty adhesives

See all adhesives

Casting and Mouldings

We are the experts in moulding
we stock only the best moulding
brands and products.

View mouldings range

Labels

We sell a range of labels
and also provide label associated
services such as slitting.

Browse Labels
Sale
XTC-3D 1 Gallon Kit

XTC-3D 1 Gallon Kit

Brand: Smooth-On
Product Code: SOXTC-3D.1
Availability: In Stock
$324.81 AUD $297.70 AUD
Ex GST: $270.64 AUD
Qty:  

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

Inexpensive to Use: 1 oz covers 100+ square inches.

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC's, phthalates or phosphates.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:





Major Brands We Stock

Rowe Trading accepts Visa and Mastercard