New Sydney Location NOW OPEN!

dismiss

Laminating Epoxy

Laminating EpoxyLaminating Epoxy
Rowe Advanced Materials

Epoxy laminating systems can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibres for lay-up applications or composite parts. They display exceptional physical and performance properties and can be sanded, shaped, machined, drilled, tapped and painted.

EpoxAcoatTM

Thixotropic epoxy gel coats which are widely used for hand laminating/tooling applications. They are tough and strong surface coat resins which cure at room temperature and offer exceptional abrasion resistance. EpoxAcoat™ RED, EpoxAcoat™ GREY, EpoxAcoat™ WHITE and EpoxAcoat™ Neutral are easy to use, wet out well over a variety of surfaces and will coat vertical surfaces without sagging.
  1. EpoxAcoatTM NEUTRAL

    A neutral colour thixotropic epoxy gel coat which is widely used for hand laminating/ tooling applications.

  2. EpoxAcoatTM WHITE

    A white thixotropic epoxy gel coat which is widely used for hand laminating/ tooling applications.

  3. EpoxAcoatTM RED

    A red thixotropic epoxy gel coat which is widely used for hand laminating/ tooling applications.

  4. EpoxAcoatTM GREY

    A grey thixotropic epoxy gel coat which is widely used for hand laminating/ tooling applications.

EpoxAmiteTM 100

EpoxAmite® 100 is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite® 100 Laminating System is unfilled, low in viscosity, odourless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibres for lay-up applications, supports shells, or composite parts then sanded, shaped, machined, drilled, tapped, or painted. It can be used in combination with EpoxAcoat® epoxy gel coat and Free Form® AIR epoxy putty to make rigid moulds and tooling.
  1. EpoxAmiteTM 101

    Easy-to-use liquid epoxy laminating system. 4A:1B by volume. Pot life 11 min, cure time 6-8 hrs.

  2. EpoxAmiteTM 102

    Easy-to-use liquid epoxy laminating system. 3A:1B by volume. Pot life 22 min, cure time 15 hrs.

  3. EpoxAmiteTM 103

    Easy-to-use liquid epoxy laminating system. 3A:1B by volume. Pot life 55 min, cure time 24 hrs.

EpoxAmiteTM WHITE

Easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite™ White Laminating System is odourless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted. EpoxAmite™ White Laminating System can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibres for lay-up& applications or composite parts. EpoxAmite™ White Resin can also be mixed with fillers such as fumed silica for gel coat applications. Urefil™ 3, Urefil™ 7 and other fillers can be added for fairing, filleting or bonding applications.
  1. EpoxAmiteTM White + 101 Hardener

    Easy-to-use white liquid epoxy system. Pot life 20 min, thin film working time 45 min, cure time 15 hrs. Base and Hardener sold separately.

  2. EpoxAmiteTM White + 102 Hardener

    Easy-to-use white liquid epoxy system. Pot life 62 min, thin film working time 120 min cure time 24 hrs. Base and Hardener sold separately.

EpoxAcoatTM HT

EpoxAcoat™ HT is a slightly thixotropic epoxy gel coat that offers high heat resistance (post cure required). Cured epoxy is tough and offers exceptional abrasion resistance. This surface coat will wet out well over a variety of surfaces with good sag resistance. Applications include laminating, precision tooling, master and pattern making, core boxes and fixtures. Use as a surface coat for EpoxAmite™ HT high temperature laminating epoxy
  1. EpoxAcoatTM HT

    Slightly thixotropic epoxy gel coat that offers high heat resistance (post cure required).

EpoxAmiteTM HT

EpoxAmite® HT High Temperature Laminating Epoxy is a water clear, UV resistant laminating epoxy that resists high temperatures up to 300°F / 149°C when properly cured. Ultra-low viscosity ensures uniform wetting out and fast penetration of reinforcement materials during hand lay-up or vacuum infusion processes.
  1. EpoxAmiteTM HT

    Water clear, UV resistant laminating epoxy with a heat resistance up to 300°F / 149°C when properly cured.

EA-40TM

EA-40™ Clear Amber Epoxy is an unfilled low-viscosity epoxy adhesive that can be spread easily in thin films that are almost transparent after curing. EA-40™ has a long pot life and provides good mechanical and electrical properties. Mix ratio is 1:1 by volume. When mixed 2A:1B by volume, EA-40™ will achieve greater heat resistance and improved physical properties. Suitable for applications ranging from electrical potting to jewelry assembly to repairing plumbing fixtures. Bow makers have come to know EA-40™ as a tremendous laminating resin. EA-40™ provides highly moisture resistant bonds meeting the performance requirements for Federal Specification MMM-A-188, Type III.
  1. EA-40TM

    Unfilled, low-viscosity, clear amber epoxy adhesive that can be spread easily in thin films that are almost transparent after curing.

Plasti-PasteTM EPOXY

Designed for vertical surface application. Plasti‑Paste EPOXY is fibre filled and can be used as a "mother mould" material to reinforce rubber moulds. This resin is also a powerful adhesive and can be used as a repair material for a variety of industrial applications. Cured plastic can be sanded, machined and pigmented.

  1. Plasti-PasteTM EPOXY

    Trowelable support shell plastic. 2A:1B by volume mix ratio - no scale required.