New Sydney Location NOW OPEN!

dismiss

Permabond

Permabond Adhesives

Permabond is one of the leading brand names in industrial adhesives, offering exceptional resistance to oil, water, coolants, and other gases.

Acrylic

Permabond acrylic adhesives are structural adhesives that are suitable for bonding a variety of materials. They cure rapidly at room temperature. Featuring high strength and durability. Making them the ideal acrylic adhesive for applications where ease of use and speed is important.

  1. Permabond TA4246

    Permabond TA4246 is a 2-part, no-mix, room temperature curing structural adhesive.

  2. Permabond TA4605

    Permabond TA4605 is a 2-part, 1:1 toughened acrylic adhesive. It has been developed to bond low surface energy plastics such as polypropylene and polyethylene – with no primer or surface treatment required.

  3. Permabond TA4610

    Permabond TA4610 is a 2-part, 1:1 toughened acrylic adhesive developed to bond low surface energy plastics such as polypropylene and polyethylene – with no primer or surface treatment required.

  4. Permabond TA4611

    Permabond TA4611 is a 2-part, 1:1 toughened acrylic adhesive developed to bond low surface energy plastics such as polypropylene and polyethylene. No primer or surface treatment required.

  5. Permabond TA4620

    Permabond TA4620 is a 2-part, 1:1 toughened acrylic adhesive developed to bond low surface energy plastics such as polypropylene and polyethylene with no primer or surface treatment.

  6. Permabond TA4660

    Permabond TA4660 is a 2-part, 2:1 low odour, acrylic adhesive. It was developed for structural bonding of nylon/polyamide.

Anaerobic

This type of adhesive comprises of a unique liquid resin that hardens (or cures) to a durable solid, when visible to metal ions – in airless environments. Anaerobic adhesives are used to augment the seal or fill a gap to prevent movement and protect against corrosion. Used in threadlocking, thread sealing, retaining, bearing fit, bullet sealing, and form-in-place gasketing.
  1. Permabond A1046

    Permabond A1046 is a rapid curing adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, pulleys and threaded components.

  2. Permabond A131

    Permabond A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water.

  3. Permabond A1044

    Permabond A1044 is a rapid curing sealant designed to lock and seal metal pipe connections, offering very good resistance to even the most aggressive chemicals.

  4. Permabond MH052

    Permabond MH052 seals against gas, water, LPG, hydrocarbons, oils and other chemicals and will seal to the burst rating of the pipe.

  5. Permabond A136

    Permabond A136 is an anaerobic material designed for making 'formed in situ' gaskets between metal surfaces.

  6. Permabond A905 Aerosol

    Permabond A Surface Activator (A905) is used in conjunction with Permabond A (anaerobic) adhesives and sealants.

Cyanoacrylate

Cyanoacrylate adhesives are one-part adhesives, curing fast and strong. Also known as "super-glues", cyanoacrylate adhesives are suitable for a wide range of materials. They have been formulated to bond flexible or rigid surfaces made from a wide range of plastics, rubbers or metals, and work well especially for difficult rubbers and plastics, medical, first aid and veterinary applications.

  1. Permabond CSA Aerosol

    Permabond C Surface Activator (CSA) is used in conjunction with Permabond cyanoacrylate adhesives to promote a faster cure and to extend their gap-filling capabilities.

  2. Permabond 102

    Permabond 102 is a low viscosity general purpose plastic bonding product useful in applications or bonding closely fitting parts.

  3. Permabond 105

    Permabond 105 is a low viscosity high purity cyanoacrylate adhesive. It is ideal for use on hard-to-bond plastics and rubbers such as natural rubber, EPDM and butyl rubber.

  4. Permabond 240

    Permabond 240 is a high viscosity product useful in large gap applications. It is ideal for porous substrates.

  5. Permabond 731

    Permabond 731 is a toughened cyanoacrylate with very good impact and peel strength when compared to a conventional cyanoacrylate.

  6. Permabond 737

    Permabond 737 BLACK MAGIC is a toughened cyanoacrylate with improved impact and peel strength for maximum flexibility.

  7. Permabond 791

    Permabond 791 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces.

  8. Permabond 792

    Permabond 792 is a low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces.

  9. Permabond 820

    Permabond 820 is a low viscosity modified ethyl cyanoacrylate suitable for applications where high temperature resistance is required.

  10. Permabond 910

    Permabond 910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts.

  11. Permabond 920

    Permabond 920 is the original allyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts.

  12. Permabond 940

    Permabond 940 is a low odour, non-fogging, non frosting alkoxy ethyl cyanoacrylate.

  13. Permabond 2010

    Permabond 2010 is a thixotropic, fast-setting cyanoacrylate particularly suitable for use on vertical and porous substrates.

  14. Permabond 2011 Gel

    Permabond 2011 is a thixotropic, fast-setting cyanoacrylate particularly suitable for use on vertical and porous substrates.

  15. Permabond 2050

    Permabond 2050 is a flexible cyanoacrylate adhesive, exhibiting improved peel strengths when compared to other grades.

  16. Permabond Polyolfin Primer

    Permabond Polyolefin Primer has been developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond Cyanoacrylate adhesives.

Epoxy

Available in both single and two-part. Single part requires heat to cure but both types are very strong with great durability. It’s the most widely used adhesive, for its efficiency, insulation properties, and water resistance. Suitable for metals, most plastics, wood stone, and concrete. Single Part epoxies are used in sealing heat exchanges, tool bonding, and bicycle frames, while the two-part epoxies are designed for potting and encapsulation of electrical components, for use where structural and high impact bond is required.
  1. Permabond ES550

    Permabond ES550 is a single-part epoxy paste which is slump-resistant (does not flow) during cure.

  2. Permabond ES558

    Permabond ES558 is a single-part epoxy paste which flows like solder when heated during curing.

  3. Permabond ET500

    Permabond ET500 is a two-part fast-setting epoxy adhesive which bonds to a wide variety of substrates such as wood, metal, ceramics and some plastics and composites.

  4. Permabond ET5145

    Permabond ET5145 1:1 mixable epoxy adhesive is high strength and has excellent environmental durability. It is suitable for applications where cured product is to come into contact with food or beverage.

  5. Permabond ET5147

    Permabond ET5147 2:1 mixable epoxy adhesive is FDA compliant, high strength and has excellent environmental durability.

  6. Permabond ET515

    Permabond ET515 is a semi-flexible toughened adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites.

  7. Permabond ET5393

    Permabond ET5393 1:1 mixable epoxy adhesive is ideal for bonding different materials where differential thermal expansion is anticipated.

  8. Permabond ET5428

    Permabond ET5428 thixotropic two-part adhesive has excellent resistance to impact and vibration. It has been found to provide exceptional performance even at elevated temperatures.

MS Polymer

A single-part, moisture curing MS polymer adhesive. It is ideal for use on a wide variety of substrate materials including metals, plastics and composites. It is ideal for exterior construction applications (e.g. frames and fascias) as it has excellent resistance to weathering.
  1. Permabond MS359 Grey

    Permabond MS359 GREY is a single-part, moisture curing MS polymer adhesive.

UV Cure

Ultraviolet adhesives are a photochemical process, where the UV light instantly cures, or “dry” inks, adhesives. It’s fast, improves solvent resistance, and bonds well. Permabond UV Cure adhesives are very high strength and are non-yellowing, perfect for glass, acrylics, and polycarbonate.
  1. Permabond UV640

    Permabond UV640 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbonate.

  2. Permabond UV632

    Permabond UV632 is a UV-curing adhesive developed for use on plastics. It has superb adhesion to acrylic and contains a long-wavelength photo initiator to allow it to cure through UV-stabilised plastics.

  3. Permabond UV630

    Permabond UV630 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics.

  4. Permabond UV625

    Permabond UV625 is a single part, fast curing, UV curable adhesive with gel-like viscosity and good depth of cure making it ideal for use on vertical surfaces or where large gaps are involved.

  5. Permabond UV610

    Permabond UV610 is a single part, fast setting, UV curable adhesive designed specifically for bonding glass and metal.

  6. Permabond UV620

    Permabond UV620 is a single part, fast curing, UV curable adhesive with excellent optical clarity and resistance to yellowing. Ideal for bonding glass and crystal for a high quality finish.

Equipment

Useful accessories for ensuring the success of your Permabond projects.
  1. 50ml Hand Gun Dispenser

    This dispensing gun features a versatile, compact, durable, and well-balanced design providing trouble-free point-of-use dispensing.

  2. Permabond Nozzle

    Individual nozzles for the use with the 1:1 Ratio 50ml Permabond Adhesives.

  3. Permabond Epoxy Adhesive Dispensers

    Dispensing applicators for the aid of dispensing 50ml Permabond Cartridges.