Vacuum Bagging Supplies

Reusable vacuum bags could reduce your labour costs by up to 80%. Yeah, that’s right. This new, innovative type of bag can be used to quickly produce all types of parts.
Vacuum bagging is a method for creating mechanical pressure on a laminate during its cure cycle. It removes trapped air between layers. It also reduces humidity, and stops shifting of fibre orientation. This means you can maximise the physical properties of the composite materials, such as carbon, epoxy and aramid.
Our silicone vacuum bags are strong, reusable, and cut down your costs
Read more
Vacuum bagging allows for a consistently distributed compression. No wrinkles, bubbles or annoying little inconsistencies in the build-up of layers. And what better way to organise your vacuum bagging supplies and materials than through Rowe Trading.
Choose Smooth-On products over traditional vacuum bagging for faster fabrication, to eliminate things like peel-ply, separating film/messy tape, and for better performance. Say goodbye to gross odour and harsh, nasty resins. It’s self-releasing, so no agents are needed. Our silicones are also resistant to heat – of up to 260°C. Plus, they’re eco-friendly, so you know you’re doing well for our planet by reducing landfill.
You can use your new vacuum bag up to 50 times with epoxy and 100 times when using pre-preg thermoplastic.
show less
Check out our concrete vacuum bagging supplies below
- You cannot add "Injection Fitting [Standard] – Part: 102116" to the cart because the product is out of stock.
Showing 1–16 of 23 results

Wax Moulding Dough 0.65kg – 102152
Alan Harper Composites
10mm PTFE Injection Plug – Part: 102142
Alan Harper Composites
Angled Spray Tip – Part: 102119
Alan Harper Composites
Mixer Spray Tip – Part: 102111
Alan Harper Composites
Spray Tip Quick Connect – Part: 102112
Alan Harper Composites
Alignment/Blanking Plug – Part: 102117
Alan Harper Composites
Anchor Eyebolt – Part: 102121
Alan Harper Composites
Insert Saddle [Standard] – Part: 102107
Alan Harper Composites
Vacuum Port [Hi-Temp] – Part: 102126
Alan Harper Composites
Resin Runner Support One metre – Part: 102135
Alan Harper Composites
Resin Runner Cross – Part: 102120
Alan Harper Composites
Injection Fitting [Standard] – Part: 102116
Alan Harper Composites
Reinforced Anchor [Standard] – Part: 102108
Alan Harper Composites
ClearVac – Vacuum Chamber and/or Catchpot – Part: 102124
Alan Harper Composites
Resin Runner Straight One Metre – Part: 102105
Alan Harper Composites