Due to current circumstances, our front office will be closed to customers until further notice. However, don't worry our online store is always available for purchases and pick up of orders is still possible from our roller door if required. (please phone ahead)
Feel free to contact us via phone call at +61 8 8234 0000 or email us at sales@rowetrading.com.au for any enquiries, we are still here to help and supply your favourite moulding, casting and adhesive products.

XTC-3D Mini (181gm)

  • Brand: Smooth-On
  • Product Code: SOXTC-3D.Mini
  • Availability: In Stock
  • $25.59 AUD
  • Ex Tax: $23.26 AUD

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

Inexpensive to Use: 1 oz covers 100+ square inches.

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC's, phthalates or phosphates.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
MAJOR BRAND WE STOCK